Eagle Ford Shale Projects

Anadarko - Cochina Gas and Oil Gathering System

UPI provided engineering and design services for the development of the Cochina Gas and Oil Gathering System which currently consists of approximately 69 miles of various diameters and lengths. The gas pipelines and related facilities will be located in Dimmit County and La Salle County, Texas.

Anadarko - Cochina Oil Handling Facility

UPI provided engineering and design services associated with the installation of new tanks, pumps, metering and related facilities to allow for injection of 30,0000 barrels of oil into the 12″ Cotulla Oil Pipeline.

Anadarko - Maverick 12" Cotulla Oil Pipeline

UPI provided engineering, pipeline design, facility design, procurement support, construction support and commissioning/operating support for the Maverick Cotulla Oil Pipeline. The project consists of 28 miles of 12-inch DOT regulated crude oil pipeline and associated facilities. The project originates at the Maverick Oil Terminal and which consists of tankage, pumping and metering and terminates at the Cotulla Terminal which consist of tankage and metering. UniversalPegasus supported Anadarko in all phases of the project from design to construction.

Anadarko - Maverick Oil Delivery System Pipeline

UPI provided engineering, pipeline design, facility design, procurement support, construction support and commissioning/operating support. The project consists of 11.5 miles of 12-inch DOT regulated crude oil pipeline and associated facilities. The pipeline will expand system capacity to allow a peak production rate up to 120,000bbl/day. The inlet crude oil pipeline feeding the facility will be routed from the 12″ Cotulla Pipeline to the Gardendale Meter Station.

Carrizo Oil & Gas - Eagle Ford Program Management

The project consists of preparing plan of development for the build out of over 33,000 acres in the Eagle Ford Shale. Acreage involves 4 Texas Counties with varying oil and gas plays. UPI provided services including, but not limited to plan of development, AFE development, overall project management, project controls and scheduling, production engineering, hydraulic modeling, environmental services, gathering system design and routing, commercial & economics support, detailed process, design, well head facility design, central delivery facilities, vessel & process equipment design, HAZOP reviews, frac/produced/treated water systems, procurement and expediting, survey, construction management and commissioning.

Chesapeake Midstream - Eagle Ford Construction Management

UPI provided on-site advisory engineering, construction management and inspection services for multiple midstream gathering projects. Projects include pipeline, process facilities, pump & compression facilities, measurement facilities for water, oil, condensate and gas.

El Paso Corporation - Eagle Ford Gathering Richie Farms Extension 2011

The project consists of eight (8) miles of dual 8-inch pipelines (gas and oil) and associated facilities. UPI provided services including, but not limited to, AFE development, environmental services, project management, project controls and scheduling, procurement assistance, routing, engineering, design and construction bid packages / evaluations. Future facilities work for this project will include measurement stations for both the liquids side and gas service. Load out facilities for rail and truck as well as a pump station and a liquids storage station for blending capabilities are included in the project.

El Paso Midstream - Eagle Ford Gathering Multi-Phase Development

The project consists of providing EPCM services to develop and build out several miles of gathering lines, interconnects and liquid handling facilities throughout LaSalle County. UPI provided survey engineering, design, environmental, and construction management services. Multi-phase projects consist of oil, gas, water and NGL systems. Additional services include, but are not limited to, project development, AFE development, environmental services, project management, project controls / scheduling, procurement assistance, routing, engineering, design and construction bid packages / evaluations.

Forest Oil - Eagle Ford Plan of Development

The project consists of providing plans of development and field infrastructure total installed costs for 118,000 acres in the Eagle Ford Shale. UPI completed preliminary design concepts for the wellhead, flow lines, gathering lines, central delivery facilities and compressor stations. UPI provided is in the early stages of field development and expects to continue into a full program management role.

ME&P- Eagle Ford Program Management

The project consists of providing total EPCM services to develop and build out more than 200,000 acres in the Eagle Ford Shale. Acreage involves 10 Texas counties and four fields of varying oil and gas plays. UPI provided EPCM services including, but not limited to, AFE development, overall project management, project controls and scheduling, production engineering, hydraulic modeling, environmental services, field development, gathering system design and routing, commercial and economics’ support, detailed process design, wellhead facility design, central delivery facilities, vessel and process equipment design, HAZOP reviews, frac / produced / treated water systems, procurement and expediting, survey, construction management and commissioning.

ONEOK - West Winfree Project

UPI provided engineering services applied to build a transfer station for its Ethane and NGL purity products. This transfer station designed to accommodate incoming and outgoing flow to multiple customers with their associated pressures and flow rates. Flow rates ranged from 50,000 BBL/D to 70,000 BBL/D at 1200 psig with a maximum capacity of 85,000 BBL/D to 155,000 BBL/D. Primary source of products received from fractionation plants and salt dome storage facility. Incoming and outgoing lines designed to an ANSI 900 system and consisted of Ethane, Propane, and EP.

ONEOK - Mt. Belvieu Storage Project

Storage facility designed for bi-directional flow to/from the transfer station. Product lines contain launcher/receivers installed for the pipelines. A emergency shutdown loop installed and dual 40″ O.D. horizontal filter vessels designed for each line. The well line-up manifold was extended for tie-in of Ethane, Propane, EP, and Raw Feed. Design for metering and meter prover performed for future incoming lines. Multi-tiered steel pipe racks and bridges built to accommodate current incoming and outgoing lines with design for future levels when additional lines added to the facility. Incoming power coordinated and design performed for power and control requirements for emergency shutdown loops, filters, metering, and pipeline leak detection.

Plains All American Pipeline - Eagle Ford Pipeline System

UPI provided survey, GIS, engineering, pipeline design, facility design, procurement support, construction support and commissioning/operating support for the Plains All American Eagle FordPipeline System. The project consists of 66 miles of 20-inch 13,500 BPH crude oil and condensate pipeline between the Gardendale and Three Rivers Terminals, with pump stations at Gardendale and Tilden. The terminal sites are located at Gardendale, Fowlerton, Tilden and Three Rivers and consist of up to eight floating roof storage tanks with capacities up to 150,000 barrels, custody transfer metering and tie-in to 3rd party connections and truck unloading for delivery of products into the system.

SM Energy - Eagle Ford Program Management

The project consists of providing services to develop and build out several miles of water systems in the Eagle Ford Shale. Systems include frac water, produced water and treated water. UPI provided EPCM services including, but not limited to, AFE development, project management, project controls and scheduling, hydraulic modeling, production engineering, environmental services, field development, design and routing, detailed process design, pump facility design, central delivery facilities, frac ponds, vessel and process equipment design, HAZOP reviews, material management, survey, construction management and commissioning.

Swift Energy - Eagle Ford Program Management

The project consists of providing services to develop and build out more than 80,000 acres in the Eagle Ford Shale. Acreage involves four (4) Texas counties of varying oil and gas plays. UPI provided EPCM services including, but not limited to, AFE development, overall project management, project controls and scheduling, production engineering, hydraulic modeling, environmental services, field development, flow line design and routing, detailed process design, well head facility design, central delivery facilities, frac ponds, vessel and process equipment design, HAZOP reviews, material management, survey, construction management and commissioning.

Talisman Energy - Eagle Ford Program Management

The project consists of providing total EPCM services to develop and build out over 38,000 acres in the Eagle Ford Shale. Acreage involves 4 Texas Counties with varying oil and gas plays. UPI provided EPCM services including, but not limited to plan of development, AFE development, overall project management, project controls and scheduling, production engineering, hydraulic modeling, environmental services, field of development, gathering system design and routing, commercial & economics support, detailed process, design, well head facility design, central delivery facilities, vessel & process equipment design, HAZOP reviews, frac/produced/treated water systems, procurement and expediting, survey, construction management and commissioning.

Talisman Energy - Celero Gas Plant

UPI provided detailed engineering and procurement support services for Talisman’s Celero Gas Plant. The facility has a capacity of 75 mmscf/d, with a highly condensed H2S train and multiple product outlets.